- Home
- About
- Products
- Category
- Brands
- Projects
- Services
- Hydrogen Technology
- Contact Us
Projects
AIR AMPLIFIER SYSTEM
Application: Transfer and boost small volumes of air/gas supply
Description:
1. Portable system that amplifies 125psi(9bar)air supply to about 600psi(41bar).
2. Economical means of boosting pressure where volume is small.
3. Suitable for low volume usage or testing.
4. Higher pressure models available.
AIR LEAK TEST SYSTEM
This customized designed air leak test system is used for leak testing of medical equipment. Our broad product range allows us to cover most applications with testers specifically designed for the intended test configuration. The leak test is clean, fast, non-destructive and repeatable. Using compressed nitrogen stored in a steel cylinder as a test gas source is safe, convenient and efficient. According to the different needs of customers, one gas booster can be installed as optional for higher test pressure.
AIRCRAFT TIRE CHARGING CRYOGENIC CART
Application: Mobile cart for aircraft tire charging
Description:
1. Directly takes in vapourized liquid nitrogen and boosting it to suitable pressure for charging aircraft tires.
2. Comes with 4 hose outlets.
3. We helped save cost by re-furbishing their current assets.
AUTOMATED FLUSHING AND PRESSURE TEST SYSTEM
Application: Suitable for high volume hydraulic pressure testing and flushing. Automated system for greater control and flexibility.
Description:
1. Combined unit to cover both flushing and pressure test function instead of having 2 units.
2. Unit can be customized based on the pressure, volume and flow rate required.
3. System optimized with programmed controls, special electronic devices and touch screen monitor.
BACKPACK HYDRAULIC TESTPAC
Application: Custom design for client to perform PU waterproofing in deep tunnels.
Description:
1. Increased comfort and portability with backpack attachment.
2. Pump specially customized to work with Polyurethane.
3. Maximum working pressure of portable pressure system is 15,000psi/1034bar.
4. Designed at only 23kg.
BLOWOUT PREVENTER (BOP) TEST BAY
Application: Blowout Preventer Testing, Hydraulic Test Bay Setup, Automated Accumulator Charging, PLC Controls
Description:
1. Customized solution for BOP manufacturer that performs both hydrostatic test and ram test.
2. Unit allows test engineers precise pressure control.
3. Designed to perform triple ram testing.
4. Test bay is fully integrated with safety features in accordance to the manufacturer’s requirements.
CHEMICAL INJECTION MODULE (IRCD)
Application: For precise injection (flow & pressure) of fluids.
Description:
1. Provide constant flow despite changes in pressure.
2. Capable of handling injection pressures of up to 15,000 psi.
3. Requires one high pressure line reducing the number of pumps required, regardless of number of injection points.
4. Can be customized based on requirements.
CHOKE AND KILL CONTROL PANEL
Application: For operating the choke and kill manifold.
Description:
1. A teamed project with the client to meet end-user’s requirement.
2. We improved their delivery lead time to end-user because the system is locally assembled by our own team of in-house technicians.
3. Easier management for the client as we are the sole point of contact for all issues with regards to the system.
CONTROL AND PRESSURE TEST SYSTEM (HPU)
Application: For opening and closing of SSSV and SSGV as well as performing hydrostatic pressure test.
Description:
1. Customized for offshore use.
2. Due to space constraint, all components are fitted within pre-designed skid.
3. Hosereels able to neatly house high pressure hoses and prevents entanglement.
4. Unit accurately meets the customer’s stipulated timing for opening and closing of their component.
CONTROL SYSTEM WITH HIGH PRESSURE HOSEREEL
Application: For precise controls of actuators on offshore platforms.
Description:
1. Comes with 2 x 50m hoses, stowed away in a compact hosereel system, for flexible connection to hard to reach places.
2. Stainless steel body built for harsh conditions on offshore platforms.
3. Poses no electrical hazard as it is air driven.
4. Customized to client’s requirements.
GAS BOOSTER ON TROLLEY
Application: Increase mobility for gas booster system.
Description:
1. Gas booster mounted with a trolley to increase mobility and positioning.
2. Improved safety and less stressed on operator to move the 20kg system around.
3. Other model of gas boosters to achieve various gas pressures can also be mounted.
4. System can be customized for use with various gases.
HI LO GAS BOOSTER SYSTEM WITH GAS RECEIVERS
Application: Gas Test, Gas Transfer
Description:
1. Gas receivers are charged by the system as storage for lower pressure and volume testing.
2. From pre-charged pressure in receivers, time taken to create a higher testing pressure is shortened.
3. System is built modular for easy placement in confined area.
HOSE TEST BENCH SYSTEM
Application: For hydraulic pressure and leak testing on hoses
Description:
1. Testing pressure up to 60,000psi(4136bar).
2. Hose size range from 1/4″ up to 1″.
3. Test chamber conforms to safety requirements and customizable to your common hose lengths and connection sizes.
4. Modular unit for easy placement.
5. Fast pre-filling and pressure build up.
6. Complete solution with integrated digital or analog chart recording system.
HYDROSTATIC & SEAT LEAK TEST SYSTEM
Application: Performs leak test with accurate flow rate measurement. Integrated vacuum flushing capability. Performs hydrostatic pressure test.
Description:
1. Integrated for both liquid and gas test.
2. Dual pumps system allows quick pressure built up.
3. Vacuum flushing is used to vacuum flush test subject and test unit before and after tests for accuracy and cleanliness. It provides easy unit maintenance.
HYDROSTATIC HI LO TEST SYSTEM
Application: General wide range hydraulic pressure and leak testing
Description:
1. Versatile unit used for quickly achieving the required test pressure in shorter time compared to a single pump system.
2. High pressure up to 20,000psi(1379bar).
3. Lower test pressure used for fast pre-fill or testing up to 7000psi(482bar).
4. Can be customized for use with different test mediums or pressure range.
5. Complete solution with integrated digital or analog chart recording system.
HYDROSTATIC VALVE TEST SYSTEM
Application: For valve testing with vacuum capability.
Description:
1. Installed with a pre-fill option for larger volumes.
2. Comes with flushing & vacuum capability.
3. System comes with dual pump system for a wider pressure test range.
4. Built for mobility.
MOBILE STORAGE COMPRESSOR
Application: To be transported to client’s operating sites where client used to depend on compressed air bottles.
Description:
1. Operates virtually anywhere with electrical supply.
2. Draws air directly from atmosphere.
3. Able to generate and store air up to 5,000psi.
4. Can be customized to fit different sized containers and for different storage volumes.
5. Can be customized to suit workshop floors. Become self sufficient by replacing existing compressed air bottles.
MINI FULLY AUTOMATIC LIQUID HI LO SYSTEM
The fully automatic liquid hi lo system aims at improving client’s overall efficiency with lesser manpower. Clients have the option to control the system manually via the controls on the unit panel or via a customized Human-Machine Interface (HMI). In manual mode, operators require only buttons push and dials turning together with digital displays to achieve their desired pressure.
In auto mode, pre-set steps & recipes within the HMI application will run the unit as desired with minimal intervention. HMI controls can be position away from the hi lo system such as within a control room. Further configurations allow a single HMI to control multiple liquid hi lo-s on the production floor.
N2 PRESSURE REGULATING SYSTEM WITH CHART RECORDER
Application: Gas Regulator, Gas Transfer
Description:
1. Pressure Regulating System is able to regulate a steady stream of gas at a desired pressure.
2. The system is not only limited to Nitrogen, but also suitable for other inert gases as well.
3. Equip with high-quality components such as De Wit chart recorder and Tescom regulator.
4. Max working pressure 6000Psi (414 Bar)
5. Able to customize system max pressure to your own requirement
NITROGEN BUFFER TANK
Application: Prevents vacuum when nitrogen supply volume drops and storage for later use.
Description:
1. Usually a portion of a complete gas generation and supply system.
2. Prevents vacuum when the nitrogen supply volume drops.
3. Reduces downtime by providing sufficient gas to the facility while repair or maintenance for the gas supply system goes on.
4. Charged pressure and storage volume can be customized upon request. Standard package comes with either 12 or 16 bottles of 50 liter receivers.
5. Can come with load test, NDT cert and lifting cert where required.
NITROGEN GENERATOR SYSTEM
Application: Provide continuous supply of industrial grade nitrogen.
Description:
1. System will extract industrial grade nitrogen from atmospheric air.
2. Suitable for high consumption clients who require constant supply of nitrogen.
3. The system is not limited to only generating nitrogen. Other types of gases in the atmosphere can also be extracted.
4. Suitable gas receivers can be integrated to the system for storage of the extracted gas. Gases can also be used directly.
OFFSHORE HPU
Application: Customized unit used offshore for testing Subsea Control Module (SCM) before actual production.
Description:
1. Unit only requires air to operate.
1. Electricity only required for lighting within unit.
2. DNV drop test certified.
PELICAN CASE GAS BOOSTER
Application: Design for easy storage and transportation of gas booster system.
Description:
1. Gas Booster system enclosed into a single pelican case.
2. Increases mobility for users to various industrial locations.
3. Other model of pumps to achieve various gas pressures also available.
4. System can be customized for use with various gases.
PRESSURE GENERATOR
Application: For client’s in-house testing of pressure gauges.
Description:
1. Allow clients to perform their own in-house calibration of their pressure gauges.
2. Calibration accuracy up to 0.05% of full scale.
3. Reduces long term cost of engaging third party calibration and eliminates waiting time.
4. Pressure test range up to 30,000 psi(2,048 bar).
5. Compact, easy to operate, minimal setup required.
SCSSV TEST SYSTEM WITH DAQ
Application: For pressure testing SCSSVs.
Description:
1. Customized semi-automatic hydrostatic test system for SCSSV manufacturer.
2. Users have options to preset testing pressure for system to run automatically.
3. Interlocking system prevents pressure test from commencing when test chamber door is not shut.
4. System comes with Data Acquisition System (DaQ).
TWIN OXYGEN BOOSTER SYSTEM
Application: Transfer and charge oxygen to a higher pressure
Description:
1. Twin booster system greatly reduces the transferring/charging time of oxygen.
2. Boosters are specially catered for handling oxygen.
3. Maximum working pressure of system is designed at 4,500psi (310bar).
4. High pressure options are available.
VALVE TEST BENCH WITH DATA ACQUISITION
Application: Pressure test valves and fittings with digital chart printout.
Description:
1. Built for both hydraulic (up to 10,000psi) & gas (up to 7,500psi) testing.
2. Suitable for testing different sized PRVs (Pressure Relief Valves) with provided seals.
3. Suitable for testing smaller sized valves and fittings.
4. Modular unit allows easy placement.
5. Data Acquisition System for recording & generating pressure test results.
WATER MEMBRANE TEST SYSTEM
Application: Testing the permeability of manufactured water membranes.
Description:
1. Accurate control of test medium pressure and flow rate.
2. Semi-automated system to achieve desired flow rate.
3. Integrated with special gauges for reading results..
Projects
AIR LEAK TEST SYSTEM
This customized designed air leak test system is used for leak testing of medical equipment. Our broad product range allows us to cover most applications with testers specifically designed for the intended test configuration. The leak test is clean, fast, non-destructive and repeatable. Using compressed nitrogen stored in a steel cylinder as a test gas source is safe, convenient and efficient. According to the different needs of customers, one gas booster can be installed as optional for higher test pressure.
AIRCRAFT TIRE CHARGING CRYOGENIC CART
Application: Mobile cart for aircraft tire charging
Description:
1. Directly takes in vapourized liquid nitrogen and boosting it to suitable pressure for charging aircraft tires.
2. Comes with 4 hose outlets.
3. We helped save cost by re-furbishing their current assets.
AUTOMATED FLUSHING AND PRESSURE TEST SYSTEM
Application: Suitable for high volume hydraulic pressure testing and flushing. Automated system for greater control and flexibility.
Description:
1. Combined unit to cover both flushing and pressure test function instead of having 2 units.
2. Unit can be customized based on the pressure, volume and flow rate required.
3. System optimized with programmed controls, special electronic devices and touch screen monitor.
BACKPACK HYDRAULIC TESTPAC
Application: Custom design for client to perform PU waterproofing in deep tunnels.
Description:
1. Increased comfort and portability with backpack attachment.
2. Pump specially customized to work with Polyurethane.
3. Maximum working pressure of portable pressure system is 15,000psi/1034bar.
4. Designed at only 23kg.
BLOWOUT PREVENTER (BOP) TEST BAY
Application: Blowout Preventer Testing, Hydraulic Test Bay Setup, Automated Accumulator Charging, PLC Controls
Description:
1. Customized solution for BOP manufacturer that performs both hydrostatic test and ram test.
2. Unit allows test engineers precise pressure control.
3. Designed to perform triple ram testing.
4. Test bay is fully integrated with safety features in accordance to the manufacturer’s requirements.
CHEMICAL INJECTION MODULE (IRCD)
Application: For precise injection (flow & pressure) of fluids.
Description:
1. Provide constant flow despite changes in pressure.
2. Capable of handling injection pressures of up to 15,000 psi.
3. Requires one high pressure line reducing the number of pumps required, regardless of number of injection points.
4. Can be customized based on requirements.
CHOKE AND KILL CONTROL PANEL
Application: For operating the choke and kill manifold.
Description:
1. A teamed project with the client to meet end-user’s requirement.
2. We improved their delivery lead time to end-user because the system is locally assembled by our own team of in-house technicians.
3. Easier management for the client as we are the sole point of contact for all issues with regards to the system.
CONTROL AND PRESSURE TEST SYSTEM (HPU)
Application: For opening and closing of SSSV and SSGV as well as performing hydrostatic pressure test.
Description:
1. Customized for offshore use.
2. Due to space constraint, all components are fitted within pre-designed skid.
3. Hosereels able to neatly house high pressure hoses and prevents entanglement.
4. Unit accurately meets the customer’s stipulated timing for opening and closing of their component.
CONTROL SYSTEM WITH HIGH PRESSURE HOSEREEL
Application: For precise controls of actuators on offshore platforms.
Description:
1. Comes with 2 x 50m hoses, stowed away in a compact hosereel system, for flexible connection to hard to reach places.
2. Stainless steel body built for harsh conditions on offshore platforms.
3. Poses no electrical hazard as it is air driven.
4. Customized to client’s requirements.
GAS BOOSTER ON TROLLEY
Application: Increase mobility for gas booster system.
Description:
1. Gas booster mounted with a trolley to increase mobility and positioning.
2. Improved safety and less stressed on operator to move the 20kg system around.
3. Other model of gas boosters to achieve various gas pressures can also be mounted.
4. System can be customized for use with various gases.
HI LO GAS BOOSTER SYSTEM WITH GAS RECEIVERS
Application: Gas Test, Gas Transfer
Description:
1. Gas receivers are charged by the system as storage for lower pressure and volume testing.
2. From pre-charged pressure in receivers, time taken to create a higher testing pressure is shortened.
3. System is built modular for easy placement in confined area.
HOSE TEST BENCH SYSTEM
Application: For hydraulic pressure and leak testing on hoses
Description:
1. Testing pressure up to 60,000psi(4136bar).
2. Hose size range from 1/4″ up to 1″.
3. Test chamber conforms to safety requirements and customizable to your common hose lengths and connection sizes.
4. Modular unit for easy placement.
5. Fast pre-filling and pressure build up.
6. Complete solution with integrated digital or analog chart recording system.
HYDROSTATIC & SEAT LEAK TEST SYSTEM
Application: Performs leak test with accurate flow rate measurement. Integrated vacuum flushing capability. Performs hydrostatic pressure test.
Description:
1. Integrated for both liquid and gas test.
2. Dual pumps system allows quick pressure built up.
3. Vacuum flushing is used to vacuum flush test subject and test unit before and after tests for accuracy and cleanliness. It provides easy unit maintenance.
HYDROSTATIC HI LO TEST SYSTEM
Application: General wide range hydraulic pressure and leak testing
Description:
1. Versatile unit used for quickly achieving the required test pressure in shorter time compared to a single pump system.
2. High pressure up to 20,000psi(1379bar).
3. Lower test pressure used for fast pre-fill or testing up to 7000psi(482bar).
4. Can be customized for use with different test mediums or pressure range.
5. Complete solution with integrated digital or analog chart recording system.
HYDROSTATIC VALVE TEST SYSTEM
Application: For valve testing with vacuum capability.
Description:
1. Installed with a pre-fill option for larger volumes.
2. Comes with flushing & vacuum capability.
3. System comes with dual pump system for a wider pressure test range.
4. Built for mobility.
MOBILE STORAGE COMPRESSOR
Application: To be transported to client’s operating sites where client used to depend on compressed air bottles.
Description:
1. Operates virtually anywhere with electrical supply.
2. Draws air directly from atmosphere.
3. Able to generate and store air up to 5,000psi.
4. Can be customized to fit different sized containers and for different storage volumes.
5. Can be customized to suit workshop floors. Become self sufficient by replacing existing compressed air bottles.
MINI FULLY AUTOMATIC LIQUID HI LO SYSTEM
The fully automatic liquid hi lo system aims at improving client’s overall efficiency with lesser manpower. Clients have the option to control the system manually via the controls on the unit panel or via a customized Human-Machine Interface (HMI). In manual mode, operators require only buttons push and dials turning together with digital displays to achieve their desired pressure.
In auto mode, pre-set steps & recipes within the HMI application will run the unit as desired with minimal intervention. HMI controls can be position away from the hi lo system such as within a control room. Further configurations allow a single HMI to control multiple liquid hi lo-s on the production floor.
N2 PRESSURE REGULATING SYSTEM WITH CHART RECORDER
Application: Gas Regulator, Gas Transfer
Description:
1. Pressure Regulating System is able to regulate a steady stream of gas at a desired pressure.
2. The system is not only limited to Nitrogen, but also suitable for other inert gases as well.
3. Equip with high-quality components such as De Wit chart recorder and Tescom regulator.
4. Max working pressure 6000Psi (414 Bar)
5. Able to customize system max pressure to your own requirement
NITROGEN BUFFER TANK
Application: Prevents vacuum when nitrogen supply volume drops and storage for later use.
Description:
1. Usually a portion of a complete gas generation and supply system.
2. Prevents vacuum when the nitrogen supply volume drops.
3. Reduces downtime by providing sufficient gas to the facility while repair or maintenance for the gas supply system goes on.
4. Charged pressure and storage volume can be customized upon request. Standard package comes with either 12 or 16 bottles of 50 liter receivers.
5. Can come with load test, NDT cert and lifting cert where required.
OFFSHORE HPU
Application: Customized unit used offshore for testing Subsea Control Module (SCM) before actual production.
Description:
1. Unit only requires air to operate.
1. Electricity only required for lighting within unit.
2. DNV drop test certified.
PELICAN CASE GAS BOOSTER
Application: Design for easy storage and transportation of gas booster system.
Description:
1. Gas Booster system enclosed into a single pelican case.
2. Increases mobility for users to various industrial locations.
3. Other model of pumps to achieve various gas pressures also available.
4. System can be customized for use with various gases.
PRESSURE GENERATOR
Application: For client’s in-house testing of pressure gauges.
Description:
1. Allow clients to perform their own in-house calibration of their pressure gauges.
2. Calibration accuracy up to 0.05% of full scale.
3. Reduces long term cost of engaging third party calibration and eliminates waiting time.
4. Pressure test range up to 30,000 psi(2,048 bar).
5. Compact, easy to operate, minimal setup required.
SCSSV TEST SYSTEM WITH DAQ
Application: For pressure testing SCSSVs.
Description:
1. Customized semi-automatic hydrostatic test system for SCSSV manufacturer.
2. Users have options to preset testing pressure for system to run automatically.
3. Interlocking system prevents pressure test from commencing when test chamber door is not shut.
4. System comes with Data Acquisition System (DaQ).
TWIN OXYGEN BOOSTER SYSTEM
Application: Transfer and charge oxygen to a higher pressure
Description:
1. Twin booster system greatly reduces the transferring/charging time of oxygen.
2. Boosters are specially catered for handling oxygen.
3. Maximum working pressure of system is designed at 4,500psi (310bar).
4. High pressure options are available.
VALVE TEST BENCH WITH DATA ACQUISITION
Application: Pressure test valves and fittings with digital chart printout.
Description:
1. Built for both hydraulic (up to 10,000psi) & gas (up to 7,500psi) testing.
2. Suitable for testing different sized PRVs (Pressure Relief Valves) with provided seals.
3. Suitable for testing smaller sized valves and fittings.
4. Modular unit allows easy placement.
5. Data Acquisition System for recording & generating pressure test results.
WATER MEMBRANE TEST SYSTEM
Application: Testing the permeability of manufactured water membranes.
Description:
1. Accurate control of test medium pressure and flow rate.
2. Semi-automated system to achieve desired flow rate.
3. Integrated with special gauges for reading results..
